Sunday, 17 May 2015

Rubicon Models SDKFZ 251/D Review

I love Hanomags. When I first started second world war reenacting the first vehicle I ever rode around in was an Sdkfz-251/D, and it was an amazing experience. The vehicle is surprisingly small and when you jump out the hatch you learn very quickly not to have your entrenching too hanging off your belt, as it tangles very easily...!



Rubicon were kind enough to send me a test shot of their recently released Sdkfz 251D 3 in 1 kit, and my apologies to them that it has taken so long to get around to reviewing it.

 







This is a very nice kit, and allows construction of an ambulance version, a personnel carrier, a pioneer version, and an anti-tank gun variant that allows you to build the 37mm anti tank gun with either early or late gun shield. It's worth noting though that if you pick the Ambulance version you won't be able to swap the bits out and use it as a transport model, at least not easily.

I built mine as an Sdkfz 251/7 the Pioneer version with assault bridges. It may be possible to make the model and not glue the bridges down, but I think they would fall off fairly frequently and potentially get lost.To add a little interest to the model I turned the front wheels slightly, by gently (And nervously..) applying pressure to the wheels once they were fitted.






Detail is very nice and very delicate. Some drilling is required to open up slots on the mud guards and hull depending what version you decide to do, and it's really worth sitting and reading the instructions once or twice before building, and to go in with a plan on how you will make the model.  I'd recommend some dry fitting too before committing to glue.


As mine was a pre-release version of the model I found a few fit problems with the hull, however I suspect these have been resolved now. It's nothing a little filler can't fix too.

I painted mine using Vallejo Middlestone, Luftwaffe Camo Green and Red Leather, then used artists oils and Mig pigments for the weathering.

Assembley took me around 20-30 minutes once I had decided the version I wanted to build. Now that the kits done I have a nicely stocked bits box with stretchers and a 37mm anti tank gun too that I can see being worked into a conversion in the future too.

All in I'd recommend this kit, and the 251 family from Rubicon, and I'll probably do a comparative piece in the future with this and other 251 kits similar to my recently finished series of StuG articles.








Rubicon models website can be found at this link And as ever more of my work can be seen at Volley Fire Painting Service

3 comments:

  1. Hi andy do you know how this compares size wise to the warlord plastic kit of the 251?
    Cheers
    Steve

    ReplyDelete
    Replies
    1. Hi Steve, it's bang on size wise, totally compatible

      Delete
  2. Great! Thanks for letting me know
    Cheers Steve

    ReplyDelete